Sicass Smoke Lens LED Flex Mounts

Now with even more LED’s for a brighter turn signal, and a M10 mounting for easier install without the need for a jumper wire.

LED turn signals with a flexible mounting stock to prevent breaking them off. Turn signals measure 2.25″ wide and 1″ tall with a through bolt mount.

NOTE:

• If installing on a 07-20 KTM EXC, a 2014-16 Husqvarna FE-S, a 2017-19 Husqvarna FE, or a 2020 Husqvarna FE-S you may also need partsSignal Rewire Kit, andSmart Flasher. (SEE BELOW)

• *If you plan to use LED turn signals on the frontANDrear, then you will need to install theSignal Rewire Kit(or22-299),ANDtheSmart Flasher.

• *If running one set of LED and one set of standard bulb turn signals you do not need theSignal Rewire Kit(or22-299), nor are you required to install theSmart Flasher.In this case the turn signals will blink slightly faster. If you wish to correct the flash rate install theSmart Flasher.